L2TP Installation Guide for Ubuntu Server
Saturday 2 March 2019
Add Comment
1. Open the "Terminal"
2. To install L2TP dependencies type following commands one by one:
sudo add-apt-repository ppa:nm-l2tp/network-manager-l2tp
sudo apt-get update
sudo apt -y install network-manager-l2tp
sudo apt-get install network-manager-l2tp-gnome
sudo apt-get update
3. Click on the "Network" icon in top right corner and choose "Edit connections..."
4. Click "Add"
![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/5090927693/original/1BrVi20vs_LeTxwkhGL3h9V4X0A1XBVBbQ.png?1511547152)
5. Select "Layer 2 Tunneling Protocol (L2TP)" as your connection type
![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/5090927700/original/RDRNTQ2cqlzHjiH1pP3VWr26oVl_BRBwgA.png?1511547188)
6. Click "Create"
![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/5090927703/original/mtmmaDEx9ju4rPqXh-kFPHvnQnJhN8he0g.png?1511547226)
7. Enter the following information:
- Connection name: Enter a name for the connection you are adding, i.e. FrootVPN
- Gateway: Enter the PPTP or L2TP server address of the location/server that you wish to connect to from our server list
- Username: Enter your FrootVPN user name
- Password: Enter your FrootVPN password
![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/5090966341/original/sFfxTqiWM-vgJCfLXCqILcLl5qze5HmwBw.png?1511771411)
Click 'IPsec Settings..."
Tick "Enable IPsec tunnel to L2TP host" and enter Pre-shared key: "frootvpnsecret".
Сlick "OK" and then click "Save"
![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/5090966319/original/wmNF-8sbT2Bo3fVUmkoLNFFCtw6AcCV2rA.png?1511771385)
8. Left-click again on your "Network" icon and choose server you wish to connect in the "VPN Connections"
![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/5090927822/original/ZXflUyex0_aFICarR_a8nHySNifsRZEctw.png?1511547725)
9. Once your connection is successful you will see the following message:
![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/5090927834/original/idimA3Zg4Ei70ym9pH7AZ67EiZq-gwOPDQ.png?1511547759)
All of your online activities are now 100% secure and anonymous while connected to FrootVPN.
- Phase1 Algorithms: aes-sha1-modp1024
- Phase2 Algorithms: aes-sha1
0 Response to "L2TP Installation Guide for Ubuntu Server"
Post a Comment